Base Package
• Hand-laid fiberglass body
• Hand-laid fiberglass bonnet
• Hood hinged
• Hand-laid fiberglass doors, inner and outer door panels bonded
• Doors hinged with bear claw lower latch
• Front DOT Laminated windshield and rear optically clear smoked acrylic window
• Hand-laid fiberglass dash
• Bare steel tube frame and integrated cockpit (DOM)
• Drive shaft assembly
• Rear suspension components for cantilever coil-over set-up
• Wilwood clutch and brake pedal assembly – aluminum
• 3 Wilwood master cylinders
Throttle pedal assembly
• Custom stainless side pipes
• Door threshold plate and panel with lower catch for bear claw
• Rear inner fenders
New manual rack and pinion with new tie-rod ends
Base Package cost: $17,900.00
Builder responsible for 90-96 C4 Corvette front and rear suspension and differential, Corvette power steering rack, coil-over shocks, wheels/tires, drive train, steering column, interior appointments, wiring harness, radiator, paint, fuel tank or cell, fuel and brake lines, lights and mirrors, steering wheel
Rolling Frame Assembly
Base Package plus:
Custom fit aluminum fuel tank with access cover that includes pick-up, sending unit, vent, roll-over valve, fill neck, monza cap and fuel cell foam
Complete rebuilt 90-96 C4 Corvette suspension – Upper and lower control arms, spindles, rear spindles, half shafts. New wheel bearings, u-joints, seals, ball joints. All bushings replaced with polyurethane. Complete rebuilt Dana 36 rear-end with gear ratio of choice, new bearings and new reinforced rear cover.
Rear toe control
Rear strut rods
Standard C4 front calipers and C4 rear calipers. Stock rotors and pads.
Braided AN fuel line. Coated steel brake lines. Braided SS flex lines at corners. Coated steel clutch line.
Mill finish steel tilt steering column, steering shaft assemblies to rack and pinion with u-joints and vibration damper.
Painted frame (color choice)
Body assembled to frame (no need to remove before painting body)
Coil-over shocks
Radiator and electric fan assembly
Rear compartment cover panels
Frame Assembly cost: $39,500.00
Client responsible for wheels/tires, Engine and trans, interior appointments, wiring harness, paint, lights and mirrors, steering wheel.
|
